Packages

class SeriesBar extends Object

Annotations
@RawJSType() @ScalaJSDefined()
Note

JavaScript name: series<bar>

Linear Supertypes
Object, Any, AnyRef, Any
Ordering
  1. Alphabetic
  2. By Inheritance
Inherited
  1. SeriesBar
  2. Object
  3. Any
  4. AnyRef
  5. Any
  1. Hide All
  2. Show All
Visibility
  1. Public
  2. All

Instance Constructors

  1. new SeriesBar()

Value Members

  1. final def !=(arg0: Any): Boolean
    Definition Classes
    AnyRef → Any
  2. final def ##(): Int
    Definition Classes
    AnyRef → Any
  3. final def ==(arg0: Any): Boolean
    Definition Classes
    AnyRef → Any
  4. val allowPointSelect: UndefOr[Boolean]

    Allow this series' points to be selected by clicking on the markers, bars or pie slices.

    Allow this series' points to be selected by clicking on the markers, bars or pie slices.

    Example:
    1. Line, column, pie

    Since

    1.2.0

  5. val animation: UndefOr[Boolean]

    Enable or disable the initial animation when a series is displayed.

    Enable or disable the initial animation when a series is displayed. The animation can also be set as a configuration object. Please note that this option only applies to the initial animation of the series itself. For other animations, see chart.animation and the animation parameter under the API methods. The following properties are supported: <dl> <dt>duration</dt>

    The duration of the animation in milliseconds.
    <dt>easing</dt>
    A string reference to an easing function set on the Math object. See the easing demo.
    </dl>

    Due to poor performance, animation is disabled in old IE browsers for column charts and polar charts.

  6. val animationLimit: UndefOr[Double]

    For some series, there is a limit that shuts down initial animation by default when the total number of points in the chart is too high.

    For some series, there is a limit that shuts down initial animation by default when the total number of points in the chart is too high. For example, for a column chart and its derivatives, animation doesn't run if there is more than 250 points totally. To disable this cap, set animationLimit to Infinity.

  7. final def asInstanceOf[T0]: T0
    Definition Classes
    Any
  8. val borderColor: UndefOr[|[String, Object]]

    The color of the border surrounding each column or bar.

    The color of the border surrounding each column or bar.

    In styled mode, the border stroke can be set with the .highcharts-point rule.

  9. val borderRadius: UndefOr[Double]

    The corner radius of the border surrounding each column or bar.

    The corner radius of the border surrounding each column or bar.

    Example:
    1. Rounded columns

  10. val borderWidth: UndefOr[Double]

    The width of the border surrounding each column or bar.

    The width of the border surrounding each column or bar.

    In styled mode, the stroke width can be set with the .highcharts-point rule.

  11. val className: UndefOr[String]

    A class name to apply to the series' graphical elements.

    A class name to apply to the series' graphical elements.

    Since

    5.0.0

  12. def clone(): AnyRef
    Attributes
    protected[java.lang]
    Definition Classes
    AnyRef
    Annotations
    @throws( ... )
  13. val color: UndefOr[|[String, Object]]

    The main color or the series.

    The main color or the series. In line type series it applies to the line and the point markers unless otherwise specified. In bar type series it applies to the bars unless a color is specified per point. The default value is pulled from the options.colors array.

    In styled mode, the series color can be set with the .highcharts-series, .highcharts-color-{n}, .highcharts-{type}-series or .highcharts-series-{n} class, or individual classes given by the className option.

  14. val colorByPoint: UndefOr[Boolean]

    When using automatic point colors pulled from the options.colors collection, this option determines whether the chart should receive one color per series or one color per point.

    When using automatic point colors pulled from the options.colors collection, this option determines whether the chart should receive one color per series or one color per point.

    Since

    2.0

  15. val colors: UndefOr[Array[|[String, Object]]]

    A series specific or series type specific color set to apply instead of the global colors when colorByPoint is true.

    A series specific or series type specific color set to apply instead of the global colors when colorByPoint is true.

    Since

    3.0

  16. val cropThreshold: UndefOr[Double]

    When the series contains less points than the crop threshold, all points are drawn, event if the points fall outside the visible plot area at the current zoom.

    When the series contains less points than the crop threshold, all points are drawn, event if the points fall outside the visible plot area at the current zoom. The advantage of drawing all points (including markers and columns), is that animation is performed on updates. On the other hand, when the series contains more points than the crop threshold, the series data is cropped to only contain points that fall within the plot area. The advantage of cropping away invisible points is to increase performance on large series. .

  17. val cursor: UndefOr[String]

    You can set the cursor to "pointer" if you have click events attached to the series, to signal to the user that the points and lines can be clicked.

    You can set the cursor to "pointer" if you have click events attached to the series, to signal to the user that the points and lines can be clicked.

    Example:
    1. Pointer cursor on line graph, on columns, on scatter markers

  18. val data: UndefOr[Array[|[|[CleanJsObject[SeriesBarData], Array[Any]], Double]]]

    An array of data points for the series.

    An array of data points for the series. For the bar series type, points can be given in the following ways:

    • An array of numerical values. In this case, the numerical values will be interpreted as y options. The x values will be automatically calculated, either starting at 0 and incremented by 1, or from pointStart and pointInterval given in the series options. If the axis has categories, these will be used. Example:
      data: [0, 5, 3, 5]
      

    -

    An array of arrays with 2 values. In this case, the values correspond to x,y. If the first value is a string, it is applied as the name of the point, and the x value is inferred.

    data: [
        [0, 5],
        [1, 10],
        [2, 3]
    ]
    

    -

    An array of objects with named values. The objects are point configuration objects as seen below. If the total number of data points exceeds the series' turboThreshold, this option is not available.

    data: [{
        x: 1,
        y: 1,
        name: "Point2",
        color: "#00FF00"
    }, {
        x: 1,
        y: 10,
        name: "Point1",
        color: "#FF00FF"
    }]
    

    Example:
    1. The demos use a line series, but the principle is the same for all types.

  19. val dataLabels: UndefOr[CleanJsObject[SeriesBarDataLabels]]
  20. val depth: UndefOr[Double]

    Depth of the columns in a 3D column chart.

    Depth of the columns in a 3D column chart. Requires highcharts-3d.js.

    Since

    4.0

  21. val description: UndefOr[String]

    Requires Accessibility module

    Requires Accessibility module

    A description of the series to add to the screen reader information about the series.

    Since

    5.0.0

  22. val edgeColor: UndefOr[|[String, Object]]

    3D columns only.

    3D columns only. The color of the edges. Similar to borderColor, except it defaults to the same color as the column.

  23. val edgeWidth: UndefOr[Double]

    3D columns only.

    3D columns only. The width of the colored edges.

  24. val enableMouseTracking: UndefOr[Boolean]

    Enable or disable the mouse tracking for a specific series.

    Enable or disable the mouse tracking for a specific series. This includes point tooltips and click events on graphs and points. For large datasets it improves performance.

  25. final def eq(arg0: AnyRef): Boolean
    Definition Classes
    AnyRef
  26. def equals(arg0: Any): Boolean
    Definition Classes
    AnyRef → Any
  27. val events: UndefOr[CleanJsObject[SeriesBarEvents]]
  28. def finalize(): Unit
    Attributes
    protected[java.lang]
    Definition Classes
    AnyRef
    Annotations
    @throws( classOf[java.lang.Throwable] )
  29. final def getClass(): Class[_]
    Definition Classes
    AnyRef → Any
  30. val getExtremesFromAll: UndefOr[Boolean]

    Whether to use the Y extremes of the total chart width or only the zoomed area when zooming in on parts of the X axis.

    Whether to use the Y extremes of the total chart width or only the zoomed area when zooming in on parts of the X axis. By default, the Y axis adjusts to the min and max of the visible data. Cartesian series only.

    Since

    4.1.6

  31. val groupPadding: UndefOr[Double]

    Padding between each value groups, in x axis units.

    Padding between each value groups, in x axis units.

  32. val groupZPadding: UndefOr[Double]

    The spacing between columns on the Z Axis in a 3D chart.

    The spacing between columns on the Z Axis in a 3D chart. Requires highcharts-3d.js.

    Since

    4.0

  33. val grouping: UndefOr[Boolean]

    Whether to group non-stacked columns or to let them render independent of each other.

    Whether to group non-stacked columns or to let them render independent of each other. Non-grouped columns will be laid out individually and overlap each other.

    Since

    2.3.0

  34. def hasOwnProperty(v: String): Boolean
    Definition Classes
    Object
  35. def hashCode(): Int
    Definition Classes
    AnyRef → Any
  36. val id: UndefOr[String]

    An id for the series.

    An id for the series. This can be used after render time to get a pointer to the series object through chart.get().

    Since

    1.2.0

  37. val index: UndefOr[Double]

    The index of the series in the chart, affecting the internal index in the chart.series array, the visible Z index as well as the order in the legend.

    The index of the series in the chart, affecting the internal index in the chart.series array, the visible Z index as well as the order in the legend.

    Since

    2.3.0

  38. final def isInstanceOf[T0]: Boolean
    Definition Classes
    Any
  39. def isPrototypeOf(v: Object): Boolean
    Definition Classes
    Object
  40. val keys: UndefOr[Array[String]]

    An array specifying which option maps to which key in the data point array.

    An array specifying which option maps to which key in the data point array. This makes it convenient to work with unstructured data arrays from different sources.

    Since

    4.1.6

  41. val legendIndex: UndefOr[Double]

    The sequential index of the series in the legend.

    The sequential index of the series in the legend.

    Try it: Legend in opposite order .

  42. val linkedTo: UndefOr[String]

    The id of another series to link to.

    The id of another series to link to. Additionally, the value can be ":previous" to link to the previous series. When two series are linked, only the first one appears in the legend. Toggling the visibility of this also toggles the linked series.

    Example:
    1. Linked series

    Since

    3.0

  43. val maxPointWidth: UndefOr[Double]

    The maximum allowed pixel width for a column, translated to the height of a bar in a bar chart.

    The maximum allowed pixel width for a column, translated to the height of a bar in a bar chart. This prevents the columns from becoming too wide when there is a small number of points in the chart.

    Example:
    1. Limited to 50

    Since

    4.1.8

  44. val minPointLength: UndefOr[Double]

    The minimal height for a column or width for a bar.

    The minimal height for a column or width for a bar. By default, 0 values are not shown. To visualize a 0 (or close to zero) point, set the minimal point length to a pixel value like 3. In stacked column charts, minPointLength might not be respected for tightly packed values.

  45. val name: UndefOr[String]

    The name of the series as shown in the legend, tooltip etc.

    The name of the series as shown in the legend, tooltip etc.

    Example:
    1. Series name

  46. final def ne(arg0: AnyRef): Boolean
    Definition Classes
    AnyRef
  47. val negativeColor: UndefOr[|[String, Object]]

    The color for the parts of the graph or points that are below the threshold.

    The color for the parts of the graph or points that are below the threshold.

    Since

    3.0

  48. final def notify(): Unit
    Definition Classes
    AnyRef
  49. final def notifyAll(): Unit
    Definition Classes
    AnyRef
  50. val point: UndefOr[CleanJsObject[SeriesBarPoint]]

    Properties for each single point

  51. val pointInterval: UndefOr[Double]

    If no x values are given for the points in a series, pointInterval defines the interval of the x values.

    If no x values are given for the points in a series, pointInterval defines the interval of the x values. For example, if a series contains one value every decade starting from year 0, set pointInterval to 10.

    Since Highcharts 4.1, it can be combined with pointIntervalUnit to draw irregular intervals.

    Example:
    1. Datetime X axis

  52. val pointIntervalUnit: UndefOr[String]

    On datetime series, this allows for setting the pointInterval to irregular time units, day, month and year.

    On datetime series, this allows for setting the pointInterval to irregular time units, day, month and year. A day is usually the same as 24 hours, but pointIntervalUnit also takes the DST crossover into consideration when dealing with local time. Combine this option with pointInterval to draw weeks, quarters, 6 months, 10 years etc.

    Since

    4.1.0

  53. val pointPadding: UndefOr[Double]

    Padding between each column or bar, in x axis units.

    Padding between each column or bar, in x axis units.

  54. val pointPlacement: UndefOr[|[String, Double]]

    Possible values: null, "on", "between".

    Possible values: null, "on", "between".

    In a column chart, when pointPlacement is "on", the point will not create any padding of the X axis. In a polar column chart this means that the first column points directly north. If the pointPlacement is "between", the columns will be laid out between ticks. This is useful for example for visualising an amount between two points in time or in a certain sector of a polar chart.

    Since Highcharts 3.0.2, the point placement can also be numeric, where 0 is on the axis value, -0.5 is between this value and the previous, and 0.5 is between this value and the next. Unlike the textual options, numeric point placement options won't affect axis padding.

    Note that pointPlacement needs a pointRange to work. For column series this is computed, but for line-type series it needs to be set.

    Defaults to null in cartesian charts, "between" in polar charts.

    Since

    2.3.0

  55. val pointRange: UndefOr[Double]

    The X axis range that each point is valid for.

    The X axis range that each point is valid for. This determines the width of the column. On a categorized axis, the range will be 1 by default (one category unit). On linear and datetime axes, the range will be computed as the distance between the two closest data points.

    Since

    2.3

  56. val pointStart: UndefOr[Double]

    If no x values are given for the points in a series, pointStart defines on what value to start.

    If no x values are given for the points in a series, pointStart defines on what value to start. For example, if a series contains one yearly value starting from 1945, set pointStart to 1945.

    Example:
    1. Linear, datetime X axis

  57. val pointWidth: UndefOr[Double]

    A pixel value specifying a fixed width for each column or bar.

    A pixel value specifying a fixed width for each column or bar. When null, the width is calculated from the pointPadding and groupPadding.

    Since

    1.2.5

  58. def propertyIsEnumerable(v: String): Boolean
    Definition Classes
    Object
  59. val selected: UndefOr[Boolean]

    Whether to select the series initially.

    Whether to select the series initially. If showCheckbox is true, the checkbox next to the series name will be checked for a selected series.

    Since

    1.2.0

  60. val shadow: UndefOr[|[Boolean, Object]]

    Whether to apply a drop shadow to the graph line.

    Whether to apply a drop shadow to the graph line. Since 2.3 the shadow can be an object configuration containing color, offsetX, offsetY, opacity and width.

    Example:
    1. Shadow enabled

  61. val showCheckbox: UndefOr[Boolean]

    If true, a checkbox is displayed next to the legend item to allow selecting the series.

    If true, a checkbox is displayed next to the legend item to allow selecting the series. The state of the checkbox is determined by the selected option.

    Example:
    1. Show select box

    Since

    1.2.0

  62. val showInLegend: UndefOr[Boolean]

    Whether to display this particular series or series type in the legend.

    Whether to display this particular series or series type in the legend. The default value is true for standalone series, false for linked series.

  63. val softThreshold: UndefOr[Boolean]

    When this is true, the series will not cause the Y axis to cross the zero plane (or threshold option) unless the data actually crosses the plane.

    When this is true, the series will not cause the Y axis to cross the zero plane (or threshold option) unless the data actually crosses the plane.

    For example, if softThreshold is false, a series of 0, 1, 2, 3 will make the Y axis show negative values according to the minPadding option. If softThreshold is true, the Y axis starts at 0.

    Since

    4.1.9

  64. val stack: UndefOr[String]

    This option allows grouping series in a stacked chart.

    This option allows grouping series in a stacked chart. The stack option can be a string or a number or anything else, as long as the grouped series' stack options match each other.

    Since

    2.1

  65. val stacking: UndefOr[String]

    Whether to stack the values of each series on top of each other.

    Whether to stack the values of each series on top of each other. Possible values are null to disable, "normal" to stack by value or "percent". When stacking is enabled, data must be sorted in ascending X order.

    Example:
    1. Line, column, bar, area with "normal" stacking. Line, column, bar, area with "percent" stacking.

  66. val states: UndefOr[CleanJsObject[PlotOptionsSeriesStates]]

    A wrapper object for all the series options in specific states.

  67. val stickyTracking: UndefOr[Boolean]

    Sticky tracking of mouse events.

    Sticky tracking of mouse events. When true, the mouseOut event on a series isn't triggered until the mouse moves over another series, or out of the plot area. When false, the mouseOut event on a series is triggered when the mouse leaves the area around the series' graph or markers. This also implies the tooltip. When stickyTracking is false and tooltip.shared is false, the tooltip will be hidden when moving the mouse between series. Defaults to true for line and area type series, but to false for columns, pies etc.

    Since

    2.0

  68. final def synchronized[T0](arg0: ⇒ T0): T0
    Definition Classes
    AnyRef
  69. val threshold: UndefOr[Double]

    The Y axis value to serve as the base for the columns, for distinguishing between values above and below a threshold.

    The Y axis value to serve as the base for the columns, for distinguishing between values above and below a threshold. If null, the columns extend from the padding Y axis minimum.

    Since

    2.0

  70. def toLocaleString(): String
    Definition Classes
    Object
  71. def toString(): String
    Definition Classes
    AnyRef → Any
  72. val tooltip: UndefOr[CleanJsObject[SeriesBarTooltip]]

    A configuration object for the tooltip rendering of each single series.

    A configuration object for the tooltip rendering of each single series. Properties are inherited from tooltip, but only the following properties can be defined on a series level.

    Since

    2.3

  73. val turboThreshold: UndefOr[Double]

    When a series contains a data array that is longer than this, only one dimensional arrays of numbers, or two dimensional arrays with x and y values are allowed.

    When a series contains a data array that is longer than this, only one dimensional arrays of numbers, or two dimensional arrays with x and y values are allowed. Also, only the first point is tested, and the rest are assumed to be the same format. This saves expensive data checking and indexing in long series. Set it to 0 disable.

    Since

    2.2

  74. val type: String

    The type of series.

    The type of series. Can be one of area, areaspline, bar, column, line, pie, scatter or spline. From version 2.3, arearange, areasplinerange and columnrange are supported with the highcharts-more.js component.

  75. def valueOf(): Any
    Definition Classes
    Object
  76. val visible: UndefOr[Boolean]

    Set the initial visibility of the series.

    Set the initial visibility of the series.

  77. final def wait(): Unit
    Definition Classes
    AnyRef
    Annotations
    @throws( ... )
  78. final def wait(arg0: Long, arg1: Int): Unit
    Definition Classes
    AnyRef
    Annotations
    @throws( ... )
  79. final def wait(arg0: Long): Unit
    Definition Classes
    AnyRef
    Annotations
    @throws( ... )
  80. val xAxis: UndefOr[|[Double, String]]

    When using dual or multiple x axes, this number defines which xAxis the particular series is connected to.

    When using dual or multiple x axes, this number defines which xAxis the particular series is connected to. It refers to either the axis id or the index of the axis in the xAxis array, with 0 being the first.

  81. val yAxis: UndefOr[|[Double, String]]

    When using dual or multiple y axes, this number defines which yAxis the particular series is connected to.

    When using dual or multiple y axes, this number defines which yAxis the particular series is connected to. It refers to either the axis id or the index of the axis in the yAxis array, with 0 being the first.

  82. val zIndex: UndefOr[Double]

    Define the visual z index of the series.

  83. val zoneAxis: UndefOr[String]

    Defines the Axis on which the zones are applied.

    Defines the Axis on which the zones are applied.

    Since

    4.1.0

  84. val zones: UndefOr[Array[CleanJsObject[SeriesBarZones]]]

    An array defining zones within a series.

    An array defining zones within a series. Zones can be applied to the X axis, Y axis or Z axis for bubbles, according to the zoneAxis option.

    In styled mode, the color zones are styled with the .highcharts-zone-{n} class, or custom classed from the className option (view live demo).

    Example:
    1. Color zones

    Since

    4.1.0

Inherited from Object

Inherited from Any

Inherited from AnyRef

Inherited from Any

Ungrouped