Value Members

1.  final def !=(arg0: Any): Boolean

   Definition Classes

   AnyRef → Any

2.  final def ##(): Int

   Definition Classes

   AnyRef → Any

3.  final def ==(arg0: Any): Boolean

   Definition Classes

   AnyRef → Any

4.  val allowPointSelect: UndefOr[Boolean]

   Allow this series' points to be selected by clicking on the shapes.

   Allow this series' points to be selected by clicking on the shapes. Selected points can be read through the Chart.getSelectedPoints() method.

   Example:

   1. Allow select on map area, map bubble

5.  val animation: UndefOr[Boolean]

   Enable or disable the initial animation when a series is displayed.

   Enable or disable the initial animation when a series is displayed. The animation can also be set as a configuration object. Please note that this option only applies to the initial animation of the series itself. For other animations, see chart.animation and the animation parameter under the API methods. The following properties are supported: <dl> <dt>duration</dt>

   The duration of the animation in milliseconds.

   <dt>easing</dt>

   A string reference to an easing function set on the Math object. See the easing demo.

   </dl>

   Due to poor performance, animation is disabled in old IE browsers for map series, but enabled on mapbubble series.

   Example:

   1. Animation enabled on map series, disabled on mapbubble series

6.  val animationLimit: UndefOr[Double]

   For some series, there is a limit that shuts down initial animation by default when the total number of points in the chart is too high.

   For some series, there is a limit that shuts down initial animation by default when the total number of points in the chart is too high. For example, for a column chart and its derivatives, animation doesn't run if there is more than 250 points totally. To disable this cap, set animationLimit to Infinity.

7.  final def asInstanceOf[T0]: T0

   Definition Classes

   Any

8.  val borderColor: UndefOr[|[String, Object]]

   The border color of the map areas.

   The border color of the map areas.

   In styled mode, the border stroke is given in the .highcharts-point class.

   Example:

   1. Borders demo

9.  val borderWidth: UndefOr[Double]

   The border width of each map area.

   The border width of each map area.

   In styled mode, the border stroke width is given in the .highcharts-point class.

   Example:

   1. Borders demo

10.  val className: UndefOr[String]

    A class name to apply to the series' graphical elements.

    A class name to apply to the series' graphical elements.

    Since

    5.0.0

11.  def clone(): AnyRef

    Attributes

    protected[java.lang]

    Definition Classes

    AnyRef

    Annotations

    @throws( ... )

12.  val color: UndefOr[|[String, Object]]

    The main color of the series.

    The main color of the series. In maps, this color is rarely used, as most choropleth maps use the color to denote the value of each point. The series color can however be used in a map with multiple series holding categorized data. The default value is pulled from the options.colors array.

    In styled mode, the series color can be set with the .highcharts-series, .highcharts-color-{n}, .highcharts-{type}-series or .highcharts-series-{n} class, or individual classes given by the className option.

    Example:

    1. Category map by multiple series

13.  val colorAxis: UndefOr[Boolean]

    Set this option to false to prevent a series from connecting to the global color axis.

    Set this option to false to prevent a series from connecting to the global color axis. This will cause the series to have its own legend item.

14.  val colsize: UndefOr[Double]

    The column size - how many X axis units each column in the heatmap should span.

    The column size - how many X axis units each column in the heatmap should span.

    Example:

    1. One day

15.  val cursor: UndefOr[String]

    You can set the cursor to "pointer" if you have click events attached to the series, to signal to the user that the points and lines can be clicked.

    You can set the cursor to "pointer" if you have click events attached to the series, to signal to the user that the points and lines can be clicked.

    Example:

    1. Pointer cursor on map area, map bubble

16.  val data: UndefOr[Array[|[CleanJsObject[SeriesHeatmapData], Array[Any]]]]

    An array of data points for the series.

    An array of data points for the series. For the heatmap series type, points can be given in the following ways:

    -

    An array of arrays with 3 or 2 values. In this case, the values correspond to x,y,value. If the first value is a string, it is applied as the name of the point, and the x value is inferred. The x value can also be omitted, in which case the inner arrays should be of length 2. Then the x value is automatically calculated, either starting at 0 and incremented by 1, or from pointStart and pointInterval given in the series options.

    data: [
        [0, 9, 5],
        [1, 3, 5],
        [2, 8, 8]
    ]
    

    -

    An array of objects with named values. The objects are point configuration objects as seen below. If the total number of data points exceeds the series' turboThreshold, this option is not available.

    data: [{
        x: 1,
        y: 3,
        value: 1,
        name: "Point2",
        color: "#00FF00"
    }, {
        x: 1,
        y: 1,
        value: 2,
        name: "Point1",
        color: "#FF00FF"
    }]
    

17.  val dataLabels: UndefOr[CleanJsObject[SeriesHeatmapDataLabels]]

    Options for the series data labels, appearing next to each data point.

    Options for the series data labels, appearing next to each data point.

    In styled mode, the data labels can be styled wtih the .highcharts-data-label-box and .highcharts-data-label class names (see example).

18.  val description: UndefOr[String]

    Requires Accessibility module

    Requires Accessibility module

    A description of the series to add to the screen reader information about the series.

    Example:

    1. Accessible stock chart

    Since

    5.0.0

19.  val enableMouseTracking: UndefOr[Boolean]

    Enable or disable the mouse tracking for a specific series.

    Enable or disable the mouse tracking for a specific series. This includes point tooltips and click events on graphs and points. For large datasets it improves performance.

    Example:

    1. No mouse tracking

20.  final def eq(arg0: AnyRef): Boolean

    Definition Classes

    AnyRef

21.  def equals(arg0: Any): Boolean

    Definition Classes

    AnyRef → Any

22.  val events: UndefOr[CleanJsObject[SeriesHeatmapEvents]]
23.  def finalize(): Unit

    Attributes

    protected[java.lang]

    Definition Classes

    AnyRef

    Annotations

    @throws( classOf[java.lang.Throwable] )

24.  final def getClass(): Class[_]

    Definition Classes

    AnyRef → Any

25.  def hasOwnProperty(v: String): Boolean

    Definition Classes

    Object

26.  def hashCode(): Int

    Definition Classes

    AnyRef → Any

27.  val id: UndefOr[String]

    An id for the series.

    An id for the series. This can be used after render time to get a pointer to the series object through chart.get().

28.  val index: UndefOr[Double]

    The index of the series in the chart, affecting the internal index in the chart.series array, the visible Z index as well as the order in the legend.

    The index of the series in the chart, affecting the internal index in the chart.series array, the visible Z index as well as the order in the legend.

29.  final def isInstanceOf[T0]: Boolean

    Definition Classes

    Any

30.  def isPrototypeOf(v: Object): Boolean

    Definition Classes

    Object

31.  val legendIndex: UndefOr[Double]

    The sequential index of the series in the legend.

32.  val mapData: UndefOr[Array[Object]]

    An array of objects containing a path definition and optionally a code or property to join in the data as per the joinBy option.

    An array of objects containing a path definition and optionally a code or property to join in the data as per the joinBy option.

    Example:

    1. Map data and joinBy

33.  val name: UndefOr[String]

    The name of the series as shown in the legend, tooltip etc.

    The name of the series as shown in the legend, tooltip etc.

    Example:

    1. Series name

34.  final def ne(arg0: AnyRef): Boolean

    Definition Classes

    AnyRef

35.  val negativeColor: UndefOr[|[String, Object]]

    The color for the parts of the graph or points that are below the threshold.

    The color for the parts of the graph or points that are below the threshold.

    Example:

    1. Spline, area and column - arearange.

    Since

    3.0

36.  final def notify(): Unit

    Definition Classes

    AnyRef

37.  final def notifyAll(): Unit

    Definition Classes

    AnyRef

38.  val nullColor: UndefOr[|[String, Object]]

    The color to apply to null points.

    The color to apply to null points.

    In styled mode, the null point fill is set in the .highcharts-null-point class.

    Example:

    1. Null color

39.  val nullInteraction: UndefOr[Boolean]

    Whether to allow pointer interaction like tooltips and mouse events on null points.

    Whether to allow pointer interaction like tooltips and mouse events on null points.

    Since

    4.2.7

40.  val point: UndefOr[CleanJsObject[SeriesHeatmapPoint]]

    Properties for each single point

41.  def propertyIsEnumerable(v: String): Boolean

    Definition Classes

    Object

42.  val rowsize: UndefOr[Double]

    The row size - how many Y axis units each heatmap row should span.

    The row size - how many Y axis units each heatmap row should span.

    Example:

    1. 1 by default

43.  val selected: UndefOr[Boolean]

    Whether to select the series initially.

    Whether to select the series initially. If showCheckbox is true, the checkbox next to the series name will be checked for a selected series.

44.  val shadow: UndefOr[|[Boolean, Object]]

    Whether to apply a drop shadow to the shapes.

    Whether to apply a drop shadow to the shapes. The shadow can be an object configuration containing color, offsetX, offsetY, opacity and width.

45.  val showCheckbox: UndefOr[Boolean]

    If true, and the series has a unique legend item, a checkbox is displayed next to the legend item to allow selecting the series.

    If true, and the series has a unique legend item, a checkbox is displayed next to the legend item to allow selecting the series. The state of the checkbox is determined by the selected option. Note that if a colorAxis is defined, the color axis is represented in the legend, not the series.

46.  val showInLegend: UndefOr[Boolean]

    Whether to display this particular series or series type in the legend.

    Whether to display this particular series or series type in the legend. Note that if a colorAxis is defined, the color axis is represented in the legend, not the series.

47.  val states: UndefOr[CleanJsObject[PlotOptionsSeriesStates]]

    A wrapper object for all the series options in specific states.

48.  val stickyTracking: UndefOr[Boolean]

    Sticky tracking of mouse events.

    Sticky tracking of mouse events. When true, the mouseOut event on a series isn't triggered until the mouse moves over another series, or out of the plot area. When false, the mouseOut event on a series is triggered when the mouse leaves the area around the series' graph or markers. This also implies the tooltip. When stickyTracking is false and tooltip.shared is false, the tooltip will be hidden when moving the mouse between series.

49.  final def synchronized[T0](arg0: ⇒ T0): T0

    Definition Classes

    AnyRef

50.  def toLocaleString(): String

    Definition Classes

    Object

51.  def toString(): String

    Definition Classes

    AnyRef → Any

52.  val tooltip: UndefOr[CleanJsObject[SeriesHeatmapTooltip]]

    A configuration object for the tooltip rendering of each single series.

    A configuration object for the tooltip rendering of each single series. Properties are inherited from tooltip, but only the following properties can be defined on a series level.

53.  val type: String

    The type of series.

    The type of series. Can be one of area, areaspline, bar, column, line, pie, scatter or spline. From version 2.3, arearange, areasplinerange and columnrange are supported with the highcharts-more.js component.

    Example:

    1. Multiple types in the same map

54.  def valueOf(): Any

    Definition Classes

    Object

55.  val visible: UndefOr[Boolean]

    Set the initial visibility of the series.

56.  final def wait(): Unit

    Definition Classes

    AnyRef

    Annotations

    @throws( ... )

57.  final def wait(arg0: Long, arg1: Int): Unit

    Definition Classes

    AnyRef

    Annotations

    @throws( ... )

58.  final def wait(arg0: Long): Unit

    Definition Classes

    AnyRef

    Annotations

    @throws( ... )

59.  val zIndex: UndefOr[Double]

    Define the z index of the series.